Vintage & Deals
Showing 21–40 of 40 resultsSorted by latest
Arctic Cat Shaft Shift Fork #0702-350
#0702-350
The part number 0702-350 corresponds to a genuine Arctic Cat Shaft Shift Fork (often painted black). This OEM part is a critical component inside the reverse gear/chaincase assembly for various Arctic Cat snowmobiles manufactured between 1999 and 2008.
OEM Drive Clutch Cover Bearing #0646-262
#0646-262
Part number 0646-262 is a genuine OEM Arctic Cat drive clutch cover bearing designed for select 1997 through 1999 snowmobile models.
OEM Needle Jet P-7 (159) #6506-019
#6506-019
The Arctic Cat part number 6506-019 is an OEM Needle Jet P-7 (159). It is a critical component used for tuning the fuel-to-air mixture inside the carburetor assembly.
OEM Ski Skag Wearbar #0703-027
Each
#0703-027
The Arctic Cat part number 0703-027 refers to an OEM Ski Skag Wearbar (also known as a ski runner). It is a critical component attached to the bottom of the snowmobile's steel skis to provide steering traction and protect the ski from wearing out.
OEM cooling-belt boot #0413-049
#0413-049
The Arctic Cat part number 0413-049 is an OEM cooling-belt boot (also known as a belt cooling duct or air intake boot). It replaces former part number 3323-032.
Rear Right (Right-Hand) Suspension Mounting Bracket, #2706-456
#2706-456
The Arctic Cat Part # 2706-456 is the official OEM Rear Right (Right-Hand) Suspension Mounting Bracket. It is commonly used on the rear tunnel assembly of several Arctic Cat snowmobiles.
Cable, Solenoid to Starte #3313-527
#3313-527
The part number 3313-527 is a genuine OEM Arctic Cat Cable, Solenoid to Starter. This heavy-gauge electrical wire carries the high current directly from the starter relay/solenoid to the starter motor to turn the engine over.
Left-Hand Running Board Tunnel Gusset #1607-163
#1607-163
The OEM part 1607-163 is an Arctic Cat Left-Hand Running Board Tunnel Gusset (also called a Tunnel Roll Gusset). It is primarily used to reinforce the left-side running board on various snowmobiles built on the ProCross and ProRide chassis (such as 2012-2017 F800, F1100, and XF models).
Right-Hand Running Board Tunnel Gusset #1607-162
#1607-162
The OEM part 1607-162 is an Arctic Cat Right-Hand Running Board Tunnel Gusset (also called a Tunnel Roll Gusset). It is primarily used to reinforce the right-side running board on various snowmobiles built on the ProCross and ProRide chassis (such as 2012-2017 F800, F1100, and XF models).
Fuel Injector Extension Harness #1686-663
#1686-663
Arctic Cat part number 1686-663 is an OEM Fuel Injector Extension Harness. It is a factory-original component used primarily on Arctic Cat snowmobiles.
OEM Passenger PowerGrip Handle, #2436-052
#2436-052
Part number 2436-052 is an official Arctic Cat OEM Passenger PowerGrip Handle designed for most Wildcat side-by-side models. This soft rubber grip adds stability and comfort for passengers in the rear seats or front passenger seats
OEM Right-Hand (RH) Front Headlight Assembly, #0609-852
#0609-852
The Arctic Cat part number 0609-852 refers to the OEM Right-Hand (RH) Front Headlight Assembly
Piston #3402-846
#3402-846
The Arctic Cat part number 3402-846 is an OEM standard 90mm piston designed for the Arctic Cat 400 DVX sport ATV (specifically spanning models from 2004–2008). Because this vehicle was built as a joint venture with Suzuki and Kawasaki, this exact component directly swaps with Suzuki part number 12111-29F00-0F0 and Kawasaki part number 13001-S006.
Cylinder Base Gasket #3005-016
#3005-016
The Arctic Cat part number 3005-016 is an original equipment manufacturer (OEM) Cylinder Base Gasket. It features a 0.020-inch thickness and is constructed from heavy-duty paper. This part is primarily designed to replace three older gasket variations under part number 3004-813.
Mountain Heavy-Duty Handlebar Assembly, #7639-490
#7639-490
Arctic Cat part number 7639-490 is the Mountain Heavy-Duty Handlebar Assembly. It is a factory-original OEM accessory that weighs 2.9 pounds and features a thicker inner-wall tubing design than the standard bars for added durability.
COVER,FRONT (LIME) #3306-561
#3306-561
Arctic Cat part number 3306-561 is an official original equipment manufacturer (OEM) component.
PISTON,SET-92-950 X (GIL), #0805-409
#0805-409
Arctic Cat part number 0805-409 is a genuine OEM Piston Set Assembly (92/93 mm 950 X Gil) used primarily in the crankshaft and piston assemblies of high-displacement Arctic Cat V-Twin ATVs and Wildcat Side-by-Sides. This part number directly replaces the older, discontinued part number 0805-299.
Arctic Cat Front Bumper Assembly #2707-140
Arctic Cat Front Bumper Assembly #2707-140
The Arctic Cat Front Bumper Assembly #2707-140 is the official OEM part number for a Front Bumper Assembly (Painted Black) designed primarily for Arctic Cat snowmobiles.
Arctic Cat Kit Pro Rec Bumper ’19 6/8000-Black #7639-959
Arctic Cat Kit Pro Rec Bumper '19 6/8000-Black #2436-570
The Arctic Cat Kit Pro Rec Bumper '19 6/8000-Black #7639-959 is the manufacturer part number for the genuine OEM Arctic Cat Front Pro Receiver Bumper. It is a rugged, powder-coated black aluminum bumper engineered to provide maximum front-end protection while adding utility to your machine.
Arctic Cat Full Windshield #2436-570
The Arctic Cat Full Windshield #2436-570
The Arctic Cat Full Windshield #2436-570 is a Genuine OEM Full Polycarbonate Windshield designed for Arctic Cat Prowler side-by-side vehicles. It is engineered to provide premium weather and debris protection while maintaining extreme field durability.